Detailed Product Description

PC1325 desktop CNC plasma cutting machine is the representative product of our company.It is mainly designed for cutting small metal sheet, and the valid cutting range is 1300mm-2500mm. Its working area is 3000mm*1500mm.

PC1325 desktop CNC plasma cutting machine adopts ballscrew intermediate driver, avoiding the swing of the beam follow-side caused by the bilateral drivers, and both sides use precise linear rail position. The beam is made of rectangle steel pipe,and driven with ballscrew and double linear rails.The whole working speed can reach 15000 mm/min, and are suitable for cutting metal sheet of thickness of 0.6~10 mm.

When plasma cutting, the steel plates are placed on the material supported shelf, but the level height is very different. In order to guarantee the cutting quality, we need to continuously adjust the relative distance between the cutting gun amd the steel plate, therefore we configured it with arc-pressure height adjuster. When plasma cutting, there will be more dust generated, in order to resuce pollution, we installed water tank below the grid shelf of the table, and configured with water input/output valves, the dust by cutting are mostly absorbed by the water.
      

Main Configuration

1Control system: DSP controller

2Servo or stepper driver

4Transmission: Taiwan AMT linear roller guide and PWI screw

5Plasma power supply: American HAIMA or FENMATE

6Height adjuster: made in China

Mail specification:

1Effective cutting width: 1300mm

2Effective cutting length: 2500mm

 3Max working speed: 15000mm/min

 4Walking accuracy± 0.05mm  Walking

5Cutting accuracy: ± 0.2mm

6Resetting positioning accuracy: ± 0.1mm

7Elevation distance of cutting torch:120mm

81200KG  Net Weight: 1200KG